Front Panel Interface
31
Lake LM Series Operation Manual Rev 1.3.5
The Corner parameter is adjustable in 0.1 dB increments, subject to defined level limits. This figure repre-
sents the level below the limiter threshold at which compression commences; the larger this negative value,
the softer the knee. A setting of 0 dB implies a hard-knee characteristic.
LimiterMax provides peak and RMS limiting
features, referred to as MaxPeak and MaxRMS
respectively. Full details regarding LimiterMax can
be found in the Lake Controller Operation Manual.
6.10.3 I/O Config Submenu
MENU > I/O CONFIG
Figure 6-16: I/O Config Submenu
This menu provides configuration options for input and output routing, along with settings for AES Termina-
tion and Iso-Float as described in the following sections.
6.10.3.1 Input Router
MENU > I/O CONFIG > INPUT RTR
Figure 6-17: Input Router 1
The signal flow diagrams in chapter 5 highlight that there are eight Input Routers available on LM Series
devices.
