Front Panel Interface
27
Lake LM Series Operation Manual Rev 1.3.5
The Module parameter can be adjusted using the rotary encoder. The Group total (shown in brackets) is only
adjustable using the Groups function in the Lake Controller.
The Group total is the sum of the individual Module value plus any values for this parameter on all Groups to
which the Module is assigned. Please refer to the Lake Controller Operation Manual for further information
on Groups.
6.10.1.2 Menu Structure Overview
From the Main Menu, the following submenus are available, as shown in Figure 6-11 and described in the
following sections.
▸
MODULE (See section 6.10.2)
▸
Mixer Gain
▸
Gain
▸
Delay
▸
Polarity
▸
Limiters
▸
INPUT CONFIGURATION (See section 6.10.3)
▸
Input Router
▸
AES Termination
▸
Iso-Float
▸
Output Router
▸
FRAME (See section 6.10.4)
▸
Frame Information
▸
Frame Reset
▸
Latency Match
▸
GPIO Configuration
▸
Front Panel
▸
FRAME PRESETS (See section 6.10.6)
▸
Preset Recall
For simplicity, the following sections refer to the
buttons by their associated name on the LCD
screen. E.g. ‘Press GAIN’ equates to ‘Press the
button adjacent to the Gain label on the LCD’.