Lake Shore Cryotronics 121 Скачать руководство пользователя | Manualshive

Страница: 32 / 62

background image

22

CHAPTER 4:

Computer Interface Operation

The USB hardware connection uses the full speed (12,000,000 bits/sec)
profile of the USB 2.0 standard; however, since the interface uses a vir-
tual serial com port at a fixed data rate, the data throughput is still lim-
ited to a baud rate of 57,600 bits/sec.

4.2.3 Installing the USB Driver

The Model 121 USB driver has been made available through Windows®
Update. This is the recommended method for installing the driver, as it
will ensure that you always have the latest version of the driver installed.
If you are unable to install the driver from Windows® Update, refer to
section 4.2.3.3 to install the driver from the web or from the disc pro-
vided with the Model 121.

These procedures assume that you are logged into a user account that
has administrator privileges.

4.2.3.1 Installing the Driver From Windows® Update in Windows® 7 and Vista®

1. Connect the USB cable from the Model 121 to the computer.
2. Turn on the Model 121.
3. When the Found New Hardware wizard appears, select Locate and

install driver software (recommended).

4. If User Account Control (UAC) is enabled, a UAC dialog box may

appear asking if you want to continue. Click Continue.

5. The Found New Hardware wizard should automatically connect to

Windows® Update and install the drivers.

If the Found New Hardware wizard is unable to con-
nect to Windows® Update or find the drivers, a mes-
sage to “insert the disc that came with your Lake
Shore Model 121” is displayed. Click Cancel and refer
to section 4.2.3.3 to install the driver from the web.

6. When the Found New Hardware wizard finishes installing the driver,

a confirmation message stating “the software for this device has

Baud rate

57,600

Data bits

7

Start bits

1

Stop bits

1

Parity

Odd

Flow control

None

Handshaking

None

TABLE 4-1

Host com port configuration

«
...
30
31
32
33
34
...
»

Содержание 121































































Отзывы:

Нет отзывов

Похожие инструкции для 121

Bomag BPR 70/70 D

Бренд: Fayat Group Страницы: 74

Бренд: Fayat Страницы: 110

Bomag BPR 25/40

Бренд: Fayat Страницы: 57

Бренд: Vanderbilt Страницы: 18

Бренд: Zhaoxin Страницы: 5

Бренд: CCS Страницы: 24

Бренд: RIDGID Страницы: 43

Бренд: Neilsen Страницы: 10

Бренд: Rapid Страницы: 87

Бренд: Inder Страницы: 2

Бренд: TDK-Lambda Страницы: 24

Бренд: Sealey Страницы: 2

Бренд: Stanley Страницы: 32

Alpha FMPS FTTP

Бренд: EnerSys Страницы: 44

Бренд: multicomp pro Страницы: 4

Бренд: Pulsar Страницы: 3

Бренд: Narex Страницы: 44

Бренд: Harken Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды