Power LED:
Lighted LED means power-on
Extinguished LED means power-off
Flashing LED means low battery voltage
TILT mode LED:
Flashing slowly (1Hz): The instrument enter into TILT preparation status
Lighted constantly: The status of TILT function become effective
Flashing quickly: The instrument is in TILT alarming status
Extinguished: The instrument exit from TILT status
Slope axis LED:
Both X and Y LEDs, the LEDs are on means this axis is in the slope set status.
Remote control indication LED
ON: remote control function is on, and able to use the remote control to operate the instrument.
OFF: remote control function is off, could only operate the instrument with keypad
4.5 on/off key
a) Press on/off key, the instrument is power on, the power LED is lighted.
b) The instrument is in auto-leveling status when the power is on. Then rotating in high speed after auto leveling, the
rotating speed is 500rpm.
4.6 Rotation speed set key
After the instrument is self-leveling, the instrument is in high speed rotation status, the rotation speed is 500rpm.Press
rotation speed set key, the rotation speed is switched to low speed, and the rotation speed is 200rpm.
4.7 Area Scanning function key
a) When the instrument is rotating, press this key to enter the area scan mode, the instrument enter into big area
scanning status, press this key again, enter into small area scanning status, press this third time, enter into dot status,
the area scanning order will be switched as follows,
4.8 Area scanning moving key
a)Under area scanning status, press area scanning moving key, single press to move slowly, long press to move
continuously.
b) Under dot status, press area scanning moving key, single press to move slowly, long press to move continuously.
4.9 TILT mode key
a) Press TILT key to exit or enter TILT mode(the instrument will power on and enter into TILT mode automatically).
b) After entering into TILT mode, the status LED flash slowly (1Hz), after leveling, the head rotates, and TILT function is
activated after 30 seconds, the status LED is always on, the instrument will sound TILT alarming once shocked, the
status LED flash quickly, the laser stop rotating and start flashing, the instrument will not self-leveling, press TILT key
again, exit TILT status and enter into self-leveling status.
c) If the instrument is under double axis slope working status, TILT key is invalid.
Big area scanning
Big area scanning
Dot
