Laird WL3004, Спецификация и руководство пользователя

Страница: 23 / 37

23
7. Controlling the Unit
The unit is controlled using the controls of the equipment that is to be cooled.
All alarm and error signaling is only indicated on the control panel of the equipment that is to be
cooled.
Safety Indications for Controlling the Unit
Also pay attention to the hints given in the chapter Safety indications on page 9 .
Switching on the Unit

The unit is ready for switching on.
1) Switch on the unit about 1 minute prior to operation of the device to be cooled using the
appropriate control of that device.
2) Check the compliance with the operational data according to the specifications listed on page 16 .

The unit is running.
Switching off the Unit

Cooling operation has come to an end.
1) Switch off the unit using the control of the device to be cooled.
2) Close all valves that may exist in the extension of the hoses running to and from the unit.

The unit is out of operation.
CAUTION
Lack of coolant may destroy the pump!

Operate the unit only when the filling of coolant container is sufficient!

Check the filling level of the coolant container regularly!