Laird DVK-BT900-S Series Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 24

background image

BT900 Development Kit

Version 0.3

Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com

www.lairdtech.com/wireless

24

Laird Technologies

Americas: +1-800-492-2320

Europe: +44-1628-858-940

Hong Kong: +852-2268-6567 x026

8

A

DDITIONAL

D

OCUMENTATION

Laird offers a variety of documentation and ancillary information to support our customers through the initial
evaluation process and ultimately into mass production. Additional documentation are available from the Laird BT900
product pages:

www.lairdtech.com/products/bt900-series

For additional questions or queries as well as to receive local technical support for the BT900 development kit refer to
the Embedded Wireless Support Center:

http://ews-support.lairdtech.com

CONN-GUIDE_DVK_BT900
Copyright © 2014 Laird Technologies, Inc. All rights reserved.
The information contained in this manual and the accompanying software programs are copyrighted and all rights are reserved by
Laird Technologies, Inc. Laird Technologies, Inc. reserves the right to make periodic modifications of this product without obligation
to notify any person or entity of such revision. Copying, duplicating, selling, or otherwise distributing any part of this product or
accompanying documentation/software without the prior consent of an authorized representative of Laird Technologies, Inc. is
strictly prohibited.
All brands and product names in this publication are registered trademarks or trademarks of their respective holders.
This material is preliminary Information furnished by Laird Technologies in this specification is believed to be accurate. Devices sold by
Laird Technologies are covered by the warranty and patent indemnification provisions appearing in its Terms of Sale only. Laird
Technologies makes no warranty, express, statutory, and implied or by description, regarding the information set forth herein. Laird
Technologies reserves the right to change specifications at any time and without notice. Laird Technologies’ products are intended for
use in normal commercial and industrial applications. Applications requiring unusual environmental requirements such as military,
medical life-support or life-sustaining equipment are specifically not recommended without additional testing for such application.
Limited Warranty, Disclaimer, Limitation of Liability

«
...
22
23
24

Содержание DVK-BT900-S Series

























Отзывы:

Нет отзывов

Похожие инструкции для DVK-BT900-S Series

Leroy-Somer R180

Бренд: Nidec Страницы: 20

Бренд: Parker Страницы: 30

Бренд: Yardney Страницы: 8

Бренд: Hanbay Страницы: 18

SensoTimer ST6 Duo eco!ogic

Бренд: Kärcher Страницы: 96

Бренд: Samcen Страницы: 65

Бренд: Brooks Страницы: 66

Бренд: Melexis Страницы: 13

Бренд: Genius Страницы: 52

Eyewitness HD ICV System

Бренд: Kustom Signals Страницы: 4

Бренд: AMALGAMATED INSTRUMENT Страницы: 27

Бренд: Seitron Страницы: 2

Бренд: Samson Страницы: 32

Fair-Play MP-50 Series

Бренд: Translux Страницы: 20

Бренд: SHOWTEC Страницы: 20

Бренд: ECO POWER Страницы: 2

Бренд: Samson Страницы: 22

Бренд: Sander Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды