Laird BL600 Series, Руководство по интеграции оборудования

Страница: 15 / 45

BL600-Sx
Single Mode BLE Module
Americas: +1-800-492-2320 Option 2
Europe: +44-1628-858-940
Hong Kong: +852-2923-0610
www.lairdtech.com/bluetooth
15 CONN-UM-BL600_v1_0
P
OWER
C
ONSUMPTION
4
Data taken at VCC 3.3V (internal DCDC convertor ON) and 25
º
C.
4.1 Power Consumption
Parameter Min Typ Max Unit
Active mode ‘peak’ current –Note1
(Advertising or Connection)
TX only run peak current @TXpwr= +4 dBm
TX only run peak current @T pwr= 0 dBm
TX only run peak current @TXpwr= -4 dBm
TX only run peak current @TXpwr= -8 dBm
TX only run peak current @TXpwr= -12 dBm
TX only run peak current @TXpwr= -16 dBm
T X only run peak current @TXpwr= -20 dBm
TX Whisper mode 1(Note2)
TX only run peak current @TXpwr= -30 dBm
TX Whisper mode 2(Note2)
TX only run peak current @TXpwr= -55 dBm
11.6
8.4
7.1
6.9
6.4
6.1
5.5
5.4
5.0
mA
mA
mA
mA
mA
mA
mA
mA
Active Mode
RX only ‘peak’ current(Note2)
8.9
mA
Ultra Low Power Mode1(Note3)
Standby Doze
3.5
uA
Ultra Low Power Mode2(Note4)
Deep Sleep (no RAM retention)
400 (Note 4)
nA
Active Mode Average current (Note5)
Advertising Average Current draw
Max, with advertising interval (min) 20 mS
Min, with advertising interval (max) 10240 mS
Connection Average Current draw
Max, with connection interval (min) 7.5 mS
with connection interval 67.5 mS
Min, with connection interval (max) 4000 mS
~800
~4.1
~400
~4.1
uA
uA
uA
uA
uA
Note1: With VCC 3.3V (internal DCDC ON). If VCC reduces to 2.1V (operating range of DCDC, the peak
current consumption would increase from 11.6mA to ~15.5mA for TX power setting of +4dBm.
Note2: Firmware version 1.1.50.0 (only) has an issue that TX PWR settings need to -40 dBm to produce -30
dBm and -65 dBm to produce -55 dBm.
Note3: Standby Doze is entered automatically (when
waitevent
statement is encountered within a
smart
BASIC application script). In Standby Doze, all peripherals that are enabled stay on and may
re-awaken the chip. Depending on active peripherals, current consumption ranges from ~2-4 µA to
> 1 mA. See individual peripherals current consumption in tables in section
Peripheral block current
consumption 4
.3 .