Lainox ORAC1, Руководство пользователя

Страница: 27 / 32

PIN Code
If enabling the PIN Code, select a 4-digit numeric PIN. The PIN Code must be enabled
before the qualified technician can enter Service Mode
Preheat Warning
To guarantee that oven reaches the desired temperature before the start of cook cycle,
enable Preheat Warning in user options. Enable setting when using recipe with different
starting temperature than default Preheat Temperature
User Options
There are several options you can change to customize the operation of the
oven for your business. The table on page 28 shows these options; the
factory setting is shown in bold type.
Accessing and modifying user options:
1� Touch the blue menu icon at the bottom of the screen.
2� Scroll down and touch to select
“User Options”.
3. Use this menu to modify oven settings.
Touch the left arrow to return to the menu after making each
change.
Note: Programming the preheat temperature in the user options
menu will set the oven to heat to a certain temperature each time it is
powered on
Allow Manual Cooking
The Allow Manual Cooking option must be enabled in order to view Allow Manual Save
options�
Clean Filter Reminder
When the “Clean Filter” message is displayed, clean the air filters
thoroughly. Cleaning the air filters will not shut off message. Message
will automatically stop displaying after 24 hours.
a� Check “Filter Cleaned” box to confirm clean.
b� Select “Dismiss” to close the pop-up.
Note: If the “Filter Cleaned” box is checked, the reminder time is also
reset.
How often the air filters need to be cleaned depends on the use of the microwave oven and
environmental conditions. Once frequency is determined, set the user option for appropriate
time frame.
Air filters and vents must be cleaned regularly to prevent overheating of oven. Refer to «1.
Air filter» on page 24 for cleaning instructions.
Time and Date
This oven maintains a data log of information, including date and time of operation. This
information is used to diagnose and troubleshoot errors. An accurate date and time are
important for the data log.
1� Select the
time . Choose the format (
12 hours or 24 hours
). Enter local time.
2� Touch the left arrow to return.
3. Choose
the date . Choose the format (
MM/DD/YYYY or DD/MM/YYYY
).
Enter today’s date.
4� Touch the left arrow to return.
2
27
90035620rev01