©
2021
鸾翼科技
版权所有
6
Preparation
Install the adjustment bracket
The adjustment bracket is used to place and support the handheld PTZ,
which is convenient for the connection between handheld PTZ and
Steadicam arm.
The installation steps are as follows:
1. Install the bottom plate of the adjusting bracket to the tripod
2. Install the two support post on both sides of the bottom plate, and the
reference lines should be aligned (the thickness of the reference lines of
the two support post are inconsistent, so don't install it wrong).
Assemble the handheld PTZ
1. The handheld PTZ is separated into several parts and placed in the protective box, as shown in the picture, and
needs to be assembled before use.
2. Take out the component 1 and place it on the tripod, respectively take out 2 (4 posts) and insert them into 1,
insert them to the mark, and tighten the screws on both sides.
1
2
