LAIKA Kosmo 5.4, Руководство пользователя

Страница: 41 / 68

41
USER GUIDE
10 - HEATING SYSTEM
The heating system consists of a heater with
integrated boiler and provides for environment heating
and production of hot water.
Hot air distribution is guaranteed by suitably
positioned vents.
The boiler emptying operation can be either manual,
by means of the special switch located on the drain
valve, or automatic. The boiler empties automatically
when the internal temperature is close to 3 °C. To
facilitate emptying operations, leave at least a kitchen
or a washroom tap open (it is however recommended
to leave all of them open, to prevent water from
stagnating inside the taps themselves with conse-
quent damages caused by frost).
Control panel
All the functions of the system can be programmed
by the Truma CP Plus control panel (a). To switch on,
operate, and switch off the system, as well as for all
the information concerning maintenance and safety,
carefully read the manual of the manufacturer, which
is provided together with the vehicle documentation.
a
For the correct operation of the heating system,
leave all the air vents open.
NOTE
In the Ecovip series, in the rear area, there is a
vent which is used to heat the sleeping area: be
careful not to cover this vent (for example with
blankets or pillows).
NOTE
When the heating is turned off and there is the
risk of freezing, the boiler empties automatically.
NOTE
In case of either automatic or manual emptying,
close the drain valve for later use.
NOTE
Always remember that in absence of electric
power supply the heating system does not work.
For this reason during the winter it is recom-
mended to check the auxiliary battery charge
frequently and, if connecting to 230 V power
supply is impossible, limit the use of the various
appliances to the minimum to ensure the battery
charge enough to operate the heating system.
WARNING
If gas supply is cut-off (for example when a
bottle is empty) the control panel might show the
following error codes 507, 516 or 517. In these
conditions, first of all restore gas supply (for
example replacing the empty gas bottle with a
new one), then operate the knob/button on the
control panel to clear the error (remember that
when you press the knob/button for the first time
only the panel back lighting might switch on and
the knob/button needs to be pressed again). If
you delete the error four times without having
restored the gas supply first, the control panel
locks for 15 minutes (the error code flashes on
the display). If the error code is displayed and the
control panel switches off/on, the control panel
will lock for 15 minutes (the error code flashes
on the display). When the control panel locks, no
operation is allowed: you need to wait till the end
of the lock period (the error code stops flashing)
before operating on the control panel again.
WARNING
Before departure it is mandatory to completely
empty the hot water boiler.
WARNING