Copyright © 2020 Laia · www.laiatech.com
All rights reserved
5
Product specifications
6
Remote control
One to one code matching
Press the "set" and "*" keys combined for 3 seconds, LED
indicator starts flashing. Camera receive the signal and power
on, LED indicator will go off if code matching successfully. The
camera can be controlled by this wireless remote control only
after one to one code pairing. Otherwise please clear the code
matching of this remote control, or use other remote control to
pair with the camera again.
If one to one code matching failed, the red LED light flashes for
20 seconds and then goes off, camera will stop code match and
turn on sleep mode; Press any key to wake up the camera and re-
match code.
Note: After code matching successfully, please select the camera
address to control it.
Clear code
Press the "set" and "*" keys combined for 3 seconds, LED
indicator starts flashing. Camera will power off and on, the LED
indicator will go off if clear code successfully.
Sleep and Wake up mode
Press any key to wake up the camera from sleep mode.
Note: In this manual, “press the key” means a click rather than a
long-press, and a special note will be given if a long-press for
more than one second is required.
When a key-combination is required, do it in sequence. For
example,“
【
*
】
+
【
#
】
+
【
F1
】
”means press“
【
*
】
”first and then
press“
【
#
】
” and last press“
【
F1
】
”.
30X
4
.
2
~
129
mm
2.11
º (N)
58.
9
º (W)
F 1.6 ~ F
4
.
7
