LAI Games Timebuster, Руководство оператора

Страница: 33 / 47

Operator's Manual – Timebuster
©
LAI GAMES
Page 28
FUSES DETAILED
For location of Fuses, please refer to the diagram on page 26 of this manual.
„ 32 CHANNEL AC DRIVER PCB FUSES (4 x 10 AMP Fast Blow).
These four fuses are for all the AC controlled lamps. These include the 60 lamps
of the light chaser in the prize box and the two lamps in the push buttons on the
control panel (Start/Stop button and Step button). The lamps are divided into 4
sections each controlled by one 10 AMP fuse.
„ MCU CONTROLLER (GAME PCB) FUSE (1 x 1 AMP Fast Blow).
This fuse is for the supply to the MCU PCB. The MCU PCB also supplies the
power to the sound PCB.
„ MCU CONTROLLER (GAME PCB) OUTPUT FUSE (1 x 4 AMP Fast
Blow).
This fuse is for the controlled outputs from the MCU controller like meters etc.
„ 16 CHANNEL DC DRIVER PCB FUSE (1 x 10 AMP Fast Blow).
This fuse is for the controlled outputs from the 16 channel DC driver PCB. These
outputs are for the 8 prize arm motors and the 8 prize arm lamps.
„ PRIZE ARM MOTORS FUSE (1 x 500 MA Fast Blow).
This fuse is for the eight prize arm motors and is located directly below the 16
channel DC driver PCB.
„ WATCHDOG PCB (1 x 1·5 AMP Fast Blow).
This fuse is for the supply to the watchdog PCB.
„ 12V AC SUPPLY (LAMPS) FUSES (4 x 10 AMP Slow Blow).
THESE 4 FUSES ARE FOR THE 12V AC SUPPLY FROM THE MAIN TRANSFORMER. THESE
SUPPLIES ARE FOR THE AC CONTROLLED LAMPS.
„ MAIN AC SUPPLY POWER FUSE (1 x 6 AMP Fast Blow).
This fuse is for the main AC supply and is situated in the IEC mains input socket.
* NOTE:
The power cord must be removed before the fuse can be accessed.