LAI Games Timebuster, Руководство оператора

Страница: 17 / 47

Operator's Manual – Timebuster
©
LAI GAMES
Page 12
CODE DISPLAY MESSAGE DELIVERED SWITCH LOCATION
C0 C 0 No Input is active
C1 C 1 Ticket Notch Ticket door (Optional)
C2 C 2 Service Switch is active Service Bracket
C3 C 3 Stop Switch is Active Player Control Panel
C4 C 4 Coin Mech. 1 Switch Active Coin Door
C5 C 5
Coin Mech. 2 Switch Active
Coin Door
C6 C 6 Prize Sensor is Active Inside Prize Chute
C7 C 7 Tilt Sensor is Active Inside Rear of Cabinet
C8 C 8 Step Switch is Active Player Control Panel
♦
Normal condition for the game is either:
∗
indicating that no switches are active, or
∗
indicating that the Ticket Notch is active (If optional Ticket
Dispenser is fitted).
NOTE:
Several switches can be simultaneously activated in Switch test. The
display will then consecutively show their codes, indicating which
switches are active. However, it is much easier to test the game
switches individually.
„ EXIT
The Switch Test is exited into Ball Gate Run Test by pressing the Test
Button once.
PRIZE ARM, LIGHTS & MOTORS TEST
„ ENTER
The Prize Arm, Lights and Motors Test can be entered by pressing
the Test button once, while in Switch test, or by pressing the Test
button three times while in Attract mode. The 4-digit LED display
will show .
DURING THE TEST:
♦
Operation of the Prize Arm, Lights and Motors can be tested. To start the test,
press the Service button. The Service button is then pressed again to step
through each prize arm; the arm lamp flashing indicates this. When the start
button is pressed, the motor on the current prize arm i.e., the one with the
flashing lamp, will be powered on. It will keep turning while the start button
is pressed
„
EXIT
The Prize Arm, Lights and Motors Test is exited into Programmable
Adjustments by pressing the Test button once.
C 0
C 1
r r r r