24
Place the upper end of the glass under the edge of the roof glass so that the lower edge of the side
glass is 50 mm from base frame elements gap.
Hold the glass in place and drill holes with a
depth of 30 mm. Fasten the glass with a glass screws.
Do not over tighten screws!
NB! Start installation of side glass from second glass. This gives a better understanding that
two glasses must be attached to one post and that their edges must extend evenly to the post
so that there must be an equal gap between the glasses. Use glass assembly block for equal
gaps
NB! Make sure that the glasses are evenly spaced and that the attachment points line up.
Observe the alignment of the glasses at their lower edge.
Start from
here
