5HP Dust Collector Manual
26
To ensure proper operation of this Dust Cyclone, the canister filter must have
adequate air flow. This means the filter must be regularly maintained by
carefully blowing the filter clean using compressed air and an air gun to
release built-up particulates trapped between the filter pleats.
For heavy duty users, it is recommended to use compressed air on a regular
basis to maintain maximum filtration efficiency and longer life span of the
filter.
Auto cleaning motor
The machine is equipped with an auto cleaning system that will clean the
canister filter every three minutes for 10 seconds one way and another 10
seconds the other way. The cleaning will stop when you shut the machine off.
While the canister is cleaning the LED light will illuminate showing that it is in
the process of cleaning.
Using Compressed Air
DISCONNECT MACHINE FROM POWER!
For heavy duty usage, use compressed air on a weekly basis to maintain
maximum filtration efficiency and longer life span of the filter.
REMOVING THE CANISTER FILTER
1.
Remove the maintenance panel on the canister cover plate (on top of the
dust chute) where the gear motor is located.
Figure 8: Maintenance Panel
