10HP
Explosion
‐
proof
Vacuum
Dust
Collector
Manual
24
4.
With the canister filter removed use a compressed air gun to thoroughly
clean between the pleats, both inside and outside.
RE-ASSEMBLING THE CANISTER FILTER AFTER CLEANING
1.
With the aid of another person, carefully re-insert the canister filter
repeating steps above in reverse.
EMPTYING OR REPLACING THE FILTER BAG
Periodically check the filter bag, if it is more than one third full, it is
recommended that you empty it.
NOTE: If the filter bag gets too full, the weight may force it to pull away
from the band clamp, exposing the user to potentially harmful particulates.
1.
Release the spring-loaded band clamp at the bottom of the filter and
remove the filter bag.
2.
Empty or replace the filter bag and re-attach using the spring-loaded
band clamp.
EMPTYING THE DRUM
Periodically inspect the contents of the drum and empty as needed. To
inspect the contents of the drum:
1.
Lift the red hand on the latch on the drum lid to lower the drum.
