laguna SuperMax SuperBrush 49, Руководство пользователя

Страница: 25 / 42

LAGUNATOOLS.COM 25
OPERATION
1. Confirm brush head is parallel to conveyor bed. See Page 17, “Checking
Parallelism ” to adjust if necessary.
2. Confirm the electrical supply is correct and connected to machine.
3. Make sure no one is working on or doing maintenance to machine.
4. Adjust contact of brush head onto material to be processed by either
turning the height adjustment handle (1 revolution equals 1/32”), or by
pressing the UP/DOWN switch on the control panel. NOTE: brush contact will
vary with application(s), material and brush head configuration. Confirm
correct contact with sample testing information or your salesperson.
Figure 16: Height Control Adjustments
Figure 17: Height Control Adjustment, electronic
Manual
Height Adj.
Electronic
Height Adj.
Electronic Height
Adjustment