laguna PS2, Руководство пользователя

Страница: 13 / 24

13
8. How-To, Brush Sanding:
8.1 General information for brush sander
Use the entire width of the Brush sanding head.
Figure 12:
Only sanding in the middle of the brush will wear the brush head quickly and unevenly.
Figure 13:
Keep the sanding abrasives and brushes in good condition, replace abrasives when dull or not
effective. .
Sanding with the abrasive worn-out will damage the support brush!
Sand as deep as the lowest part of the profile with sharp abrasives (Fig. 14)
Do not push stock excessively deep into abrasives (Fig. 15)!
Figure 14: Proper depth, with sharp abrasives
Figure 15: Excessive penetration with sharp abrasives