1HP One stage Dust Collector Manual
22
INTAKE ADAPTER TO THE DUST CHUTE
1.
Line up four holes in the intake adapter (one shown as X) Fig.4 with
four holes in the dust chute.
2.
Use the included #8 x 1/2” countersunk screws, fasten the intake
adapter to the dust chute.
SEVERE LACERATION HAZARD. TURN THE UNIT
"OFF," Disconnect the UNIT from the power source
and wait 2-1/2 minutes to allow time for internal rotating components
to stop before installing or removing accessories, before adjusting or
changing set-ups, clearing clogs or when making repairs. The dust
collector is not supplied with a 4" wide flexible dust intake hose. Please
assemble your own 4” wide flex hose to the intake adapter and secure
with a hose clamp. Assemble the other end of the flexible hose and to
the woodworking machine and secure with a hose clamp.
IMPORTANT: Do not operate the dust collector without the flexible
hose assembled to the intake adapter.
X
