Laguna Tools Smartshop II, Руководство пользователя

Страница: 24 / 51

24
Vacuum Table T-Slots
The vacuum table has T-slot mounting
devices incorporated into the tables to
enable fixtures and material blanks to be
clamped directly to the table. Clamps are
provided, but the table must be protected
with a backer when using jacking bolts. If
the jacking bolts come in contact with the
composite or aluminium of the table, the
materials could be damaged. The backer
should be as large as possible to spread the
load on the machine table.
Automatic Tool Changer (ATC)
The Automatic Tool Changer consists of a
group of tool holder grippers mounted to a
rigid bar. The machine control knows the
location of each of the grippers and will load
and unload tools automatically as required
by the program.
The Automatic Tool Touch-Off system
(described later in this manual) is used to
measure the tool lengths automatically.
Backing
Clamp