Laguna Tools RPM5, Руководство пользователя

Страница: 12 / 50

12
Before you remove your machine from the pallet select the area where you will
use your machine. There are no hard and fast rules for its location but below are
a few guidelines.
1. Adequate lighting. The better the lighting the more accurate and safely you will
be able to work
2. Solid floor. You should select a solid flat floor, preferably concrete or
something similar.
3. Close to power source and dust collection.
4. Allow an area for the storage of blanks and finished jobs.
To unpack your machine you will need tin snips, knife and a wrench.
1. Using the tin snips cut the banding that is securing the packing box [If fitted].
WARNING: EXTREME CAUTION MUST BE USED BECAUSE THE BANDING
WILL SPRING AND COULD CAUSE INJURY.
2. Dismantle the box or remove the row of
screws around the base of the box and lift
the box off the pallet. You will need two
people to lift the box off the pallet.
3. Using the knife cut the plastic wrap. The
parts and accessories that were ordered are
in the box.
4. Remove the base mounting bolts that
secure the machine to the box [if fitted].
5. It is recommended that the machine be
removed from the pallet by lifting it with a
hoist or forklift. Remove the pallet and lower
to the floor. Slings or fork lift blades should
be fed through lifting points.
The machine can be lifted using a fork-lift truck / "SLING" with a minimum lifting
capability of1000 Kg [ 2400 lb]
Note: If you have any doubt about the described procedure, seek professional
assistance. Do not attempt any procedure that you feel is unsafe or that you do
not have the physical capability of achieving.
Where to Locate Your Machine
Unpacking Your Machine
Lifting point