Laguna Tools REVO 1216, Руководство пользователя, Страница: 15 / 32

2. Setup
15
2.
Se
tu
p
REVO 1216 Lathe © 2018 Laguna Tools 10/22/2018
EN
abnormalities prior to loading stock workpieces. A balanced workpiece will not
assume any rotation orientation.
Personal Protection Equipment & Safety
Make sure to completely read and understand the Safety Sections of this
manual prior to proceeding. It is vital to follow these instructions to limit the danger
evolved when using this machine.
Turning on the machine
1. Confirm that the belt is in the correct speed range. See Changing between speed
groups .
2. Confirm that the appropriate personal protective equipment is being used.
3. Confirm that all chisels and wok tools are within close range and DO NOT
require any reaching over the workpiece.
4. Plug in the machine to the appropriate receptacle as denoted on the machine
information plate.
5. Double check the workpiece balancing and rotation.
6. Turn on the machine. The machine will always start at 0 RPM when turned on.
7. Set the speed and get to work!
2.6 Accessories & Options
The following accessories are designed for the REVO 1216 Lathe. These instructions
should be followed exactly to properly set up the equipment. Some of these
accessories are designed to fit multiple machines offered by Laguna Tools, check
the specification sheet for a fit guide of all REVO accessories.
1216 Bed Extension & Outboard Turning
SKU: ALAREVO12 EXTENSION
Fits: MLAREVO 1216-110
FAQ
Q: Does the REVO 1216 Headstock swivel 180
degrees like the 18/24-36 Lathes?
A: No, this accessory allows for outboard turning
by mounting the workpiece on the LEFT spindle
and running the lathe in reverse.
Q: Can i order only the 10" Extension piece?
A: No
Fig L004: 10" Outboard Extension for REVO 1216 10". Includes 10" Extension, Outboard
turning tool rest knuckle, and Tool Rest clamp. (1) As bed lengthening function - increased
center to center from 15" to 25". (2) As outboard turning function - allows for 16" throwing
capacity.
WARNING! Unplug machine from power prior to proceeding!
NOTICE! Do not over torque the threading, firm pressure is all that is required.
NOTE: The (2.2) Tool rest extension, and (2.4) Lock Handle, are only used when outboard turning.
Fig L018: Receiving and un-boxing the ALREVO12 Extension. (1) Un-boxing Contents. (2)
Components un-boxed. (2.1) 12" Extension Bed. (2.2) Tool Rest Extension. (2.3) Extension
Bed Bolts. (2.4) Lock Handle.
Receiving
3
14
6