Laguna Tools MPLAN25-10-1-0130, Руководство пользователя

Страница: 5 / 31

4
Uncrating the Machine
Retain all packaging materials in case it becomes
necessary to ship the machine to another site.
Machine Preparation and Setup
WARNING!
The equipment used to lift this machine must
have a rated capacity at, or above the weight
of the planer. Failure to comply may cause
serious injury!
The planer can be lifted from over head using
slings and the four lifting hooks A.
The planer must be positioned on a smooth,
level surface. Install the leveling pads B under
the four corners of the planer.
Clean all rust protected surfaces with a
commercial solvent. Do not use acetone,
gasoline, lacquer thinner or any type of
flammable solvent, or a cleaner that may
damage paint. Cover cleaned surfaces with
WD-40 or a 20W machine oil.
Place a level on the table of planer and adjust
leveling bolts C until the machine is resting
level. Tighten the hex nuts D against the base
of the planer to keep the leveling bolts from
turning (Fig. 1)