![Laguna Tools MPLAN25-10-1-0130 Скачать руководство пользователя страница 10](http://html1.mh-extra.com/html/laguna-tools/mplan25-10-1-0130/mplan25-10-1-0130_manual_3315807010.webp)
9
Setup of Feed Rollers, Chip Breaker and
Pressure Bar
WARNING!
Disconnect machine from the power source
before performing any adjustments or
maintenance. Failure to comply may cause
serious injury!
The planer comes set up from the factory and
shouldn’t need any adjustment.
If you find adjustment is necessary, follow
the below listed sections for setting the
infeed roller, chip breaker, pressure bar
and outfeed rollers.
Make a hardwood block to the
specifications in drawing Fig.13. You can
use this wood gauge along with 0.02” feeler
gauge to set the planer up as shown in
Fig. 12.
Setup for planning applications. Depending
on the stock and cutterhead you may find
that a different setup may work better for
your particular planning operation.
Содержание MPLAN25-10-1-0130
