18
MODE
= Toggles between the three jogging modes: Continuous, Step or
Distance.
RUN PAUSE / DELETE
= Used to load a program from either the USB drive or
internal memory. While the program is running, causes the Operation to “Pause”.
STOP / CANCEL
= Stops a running program. Also used to cancel commands.
Turning On The Machine
Note:
Before you turn on the machine remove all
tools and other objects from the machine table.
Release the emergency stop by twisting
clockwise and it will pop out.
Press the green start button that will turn power
on to the machine.
Pressing the green button will also power the
controller, and the display will light up.
The screen will display “Go to Home.”
Make sure that the table surface is clear of
obstructions and press the green Origin/OK
button.
The router head will move to the home position on
the table.
Note
:
Home is a mechanical position that is a
constant that is determined by switches on each
of the 3 axes.
X+= Across (from left-to-right when standing in
front of the machine).
Y+ = Length (from front-to-back when standing
in front of the machine).
Z+= vertical (up).
By pressing HIGH LOW / 0 and MENU / - the
display will change to AX=0, AY=0, and AZ=0.
When the X, Y and Z have an A in front, this
denotes that the dimensions displayed are in
reference to the machine’s home position.
When the X, Y and Z values are displayed with
a number (1-9), this indicates the dimensional
relationship of the machine from the machine
“Origin”.
To Move The Router Head
There are 3 different methods of moving the router head.
1.
Continuous
mode
. Press the mode button until Continuous is displayed. The
display will show (bottom row of the screen) the changing location of the router
head as it moves location. By holding X+ button down, the machine will move
constantly until the button is released. This is the same for X-, Y+, Y-, Z+ and Z-.
The “High/Low” button determines the speed of the jogging moves.
Emergency stop
button
Start button
Содержание MCNC Swift 48 X 48 1000-0233
Страница 2: ......
