14
Electrical connections for the machine
There are two electrical cables. One is the main power
cable and has no plug fitted, as it will
depend on your installation. Ensure that when
installing the electrical supply to the machine, that
220v single phase is supplied.
It is recommended that you use a 20 amp
breaker.
Note:
When wiring the machine to your electrical
system, keep your cable as short as possible, and
the cable should not be allowed to run along the
floor, as this will cause a trip hazard.
The second cable has a female electrical socket
.
p
m
u
p
r
e
t
a
w
e
h
t
o
t
n
o
it
c
e
n
n
o
c
r
o
f
Note. A qualified electrician must carry out the
electrical installation.
Connecting the water pipes to the machine
There are two water tubes that come
out of the caterpillar track.. These are
used to provide cooling for the liquid-
cooled router spindle.
Note:
Never run the motor without
the cooling being connected or the
motor could be damaged.
Main power cable
Water pump socket
Coolant pipe 90- Deg pipe fitting
Содержание MCNC Swift 48 X 48 1000-0233
Страница 2: ......
