Dake Corporation
1809 Industrial Park Dr
Grand Haven, MI 49414
Part# VDL-18
9
REV#082020
10. Use the right tool. DO NOT force a tool or attachment to do a job which it was not
designed for.
11. DO NOT make cuts requiring more power than is available on the machine.
12. Replace warning labels if they become obscured or removed.
13. Make certain the motor switch is in the OFF position before connecting the machine to
power.
14. Give your work undivided attention. Looking around, carrying on a conversation. And
“horse-play” is careless acts that can result in serious injury.
15. Make a habit of checking to see that keys and adjusting wrenches are removed before
turning on the machine.
16. Keep visitors a safe distance from the work area.
17. Use recommended accessories; improper accessories may be hazardous.
18. Never place hands directly in line with the saw blade.
19. Always use push sticks when cutting small material.
20. Raise or lower the blade guide only when the machine has been turned off and the blade
has stopped moving.
21. Read and understand warnings posted on the machine.
22. DO NOT use attachments for any other purpose than for what they were designed for.
Failure to comply with all these warnings could lead to serious injury.
This is the safety alert symbol.
-
When you see this symbol on your press be alert to the potential for personal injury.
▲
WARNING
All electrical connections must be done by a qualified electrician. Failure to comply
may cause serious injury!
All adjustment or repairs must be done with the machine disconnected from the power
source. Failure to comply may result in serious injury!
