Dake Corporation
1809 Industrial Park Drive
Grand Haven, MI 49417
21
983113
REV112020
9. Lift the saw bow after completion, as shown in Fig.4, loosen
the rotating seat mechanism, adjust the saw belt and fix the
vise surface at a 90-degree angle, and use the zero-point
fixing frame screws to perform zero adjustment. (Note: Make
sure that the iron cut of the roller groove of the rotating seat
is clean, to avoid the damage caused by the deposit when
the bearing rolls)
10. The above action is a complete adjustment of the bandsaw
guide block bearing. It only needs to be adjusted when
sawing is inaccurate. Generally, it is not necessary to adjust
the bandsaw when it is replaced.
O
P
Figure 8
J
K
E
I
G
F
H
Figure 6
L
M
N
Figure 7
