11
EN
• Put the required amount of coffee in the coffee filter
Fig. 12
.
• Close the filter holder compartment until the Release button
(12)
clicks into place.
• Place the glass carafe
(17)
on the heating plate
(18) Fig. 16
.
• Press the Grind off button
(2)
. Press the Grind and brew button after pressing Grind off
button for the coffee symbol to appear
(E)
.
• After a few seconds, the appliance starts making the coffee.
• To interrupt the process, press the Grind and brew button
(1)
.
• If the process is completed, the appliance will beep and switch to keep-warm mode. The
cup-of-coffee symbol
(E)
starts flashing. The appliance can be switched off by pressing the
Grind off button
(2)
or the appliance switches off automatically after 2 hours.
Setting the coffee quantity
ONLY for « Grind / Brew », NOT applicable for « Grind Off ».
The coffee strength selector
(7)
is used for setting the required coffee strength. The
coffee strength selector
(7)
can be set to mild coffee (MILD), medium coffee (MEDIUM)
and strong coffee (STRONG).
Setting the coffee strength
(B)
ONLY for « Grind / Brew », NOT applicable for « Grind Off ».
The coffee strength selector
(7)
is used for setting the required coffee strength. The
coffee strength selector
(7)
can be set to mild coffee (MILD), medium coffee (MEDIUM)
and strong coffee (STRONG)
Fig. 14.
Note:
The appliance can only be used when the display is activated. If the display is not
activated, press any button to activate the display. The appliance is ready for use.
• Repeatedly press the coffee strength selector
(7)
to set the coffee strength. The coffee
strength
(B)
is shown on the display
(8)
.
Setting the ground coffee fineness (Fig. 8)
The ground coffee fineness selector
(9)
is used for setting the required fineness of the
ground coffee when using coffee beans. The ground coffee fineness selector
(9)
can be
set to different positions from fine ground coffee to coarse ground coffee.
• Turn the ground coffee fineness selector
(9)
to the required position to set the fineness
of the ground coffee.
Auto start function
The appliance has an auto start function which makes it possible to program the time for
starting the coffee-making process.
Note:
The appliance can only be used when the display is activated. If the display is not
activated, press any button to activate the display. The appliance is ready for use.
• Set the clock. Check whether the clock has already been set. If the clock has not been
set, refer to the section “Setting the clock”.
• Keep the Auto start button
(5)
pressed until the clock on the display flashes.
• Repeatedly press the Hour button
(6)
to set the hours.
• Repeatedly press the Minutes button
(7)
to set the minutes.
• Set the coffee quantity. Refer to the section “Setting the coffee quantity”.
• Set the coffee strength. Refer to the section “Setting the coffee strength”.
• If you want to make coffee with ground coffee, switch off the grinding function before
Содержание Grind and Brew
