Lagostina Artiste, Инструкция по эксплуатации

Страница: 11 / 27

11
EN
Do not put other parts of the coffee maker into the dishwasher.
• Clean the coffee maker with a damp cloth or sponge. Never use abrasive or strong
products on any part of the coffee maker.
• To clean the stainless steel parts of your coffee maker, dampen a soft cloth or sponge
with warm water. Wipe carefully with a dry cloth.
• For difficult stains, use a cloth with white vinegar.
• Do not immerse the appliance in water or under the tap.
Descaling
•
Why descale?
− Limestone forms naturally in your coffee maker. Descaling preserves the coffee maker
and ensures it will last longer and provide quality coffee over time. Limestone can
permanently affect the machine’s performance. Malfunctions associated with scaling
will not be covered by the warranty if the product is returned.
•
When to descale?
− When your machine needs descaling, the CLEAN button light will come on.
− The descaling frequency depends on the hardness of the water and the number of
brew cycles. If you notice the following signs: longer cycle time, excessive steaming,
more noise at the end of the cycle, stopping mid-cycle,
this means your machine has
limestone build up and needs to be descaled.
− Your coffee maker should be descaled around once a month depending on the hardness
of the water.
− If your machine needs descaling, the CLEAN button
(q)
light will flash 3 times at the
end of the cycle.
Note: If you press the BREW button (k) while the CLEAN button (q) light is on, the
descaling cycle will start instead of the brew cycle.
How to descale your Lagostina coffee maker
• Remove the filter cartridge
(t)
.
Figs 19* and 20*.
• Use 17 fl. oz of white vinegar diluted in 17 fl.oz of cold or water at room temperature
or 1.5 oz of citric acid diluted in 17 fl. oz until complete dissolution of crystals.
Fig. 21.
• Pour the solution into the water tank (without coffee).
Fig. 22.
• Press the CLEAN button
(q)
followed by the BREW button
(k)
to start the descaling
cycle.
Fig. 23.
• The cycle lasts for 30 min.
• Wait until the end of the cycle.
• If the water tank is not empty, please launch another descaling cycle by pressing CLEAN
button.
• To rinse the machine, run 2 full 12 cups cycles with water but without coffee.
Fig. 24.
• Repeat if necessary.
• Put the filter cartridge back.
Figs. 27* and 28*.
•
The warranty does not cover coffee makers that do not work, or do so poorly, due
to lack of descaling.
* depending on the model