Lagoon 380, Руководство пользователя

Страница: 39 / 114

LAGOON 380
4
HULL
& DECK
37
The LAGOON 380 is built of balsawood sandwich (monolithic below
the water line),polyester resin and vinyl-ester; the counter-mould
sare monolithic and the partitions are made of laminated plywood.
The nacelle and deck are of balsawood sandwich composite.
The materials and equipments of your boat have been selected
because of their high quality and performance and ease of
maintenance.
However you shall carry out a minimum maintenance in order to
protect your boat from outside attacks (salt, sun, electrolysis ...).
Preferably wash your boat on shore.
Use as few cleaning agents as possible.
Don't use solvents or aggressive detergent agents.
Don't discharge your cleaning product into the water.
Regularly brush the deck with a degreasing shampoo and fresh
water.
DECK FITTING
- Rinse thoroughly all your equipments with fresh water.
- Periodically lubricate blocks, sheaves, bottle screws, winches,
rails and travellers with a water-repellent grease.
- Stainless steel that is showing small spots or blisters of rust should
be cleaned and polished with a chrome and steel renovator.
SOLID WOOD ON EXTERIOR WOODEN PANELLING
Regularly clean the woodworks with fresh water using a sponge (if
need be add some gentle soap).
PLEXIGLAS
- Rinse plexiglas with fresh water.
- Brighten up with a soft rag soaked with liquid paraffin.
- Use polish paste to remove scratches.
EXTERIOR CUSHIONS
Bring the removable cushions inside (washed with soapy water then
dried) when the vessel is inoccupied.
STAINLESS STEEL
Stainless steel is not incorruptible and requires a minimum of
upkeep:
- The use of chrome tools is preferable whenever handling stainless
steel.
- Re-nourish the protective film regularly with passivation paste
(consult your dealer).
A (tin-free) anti-fouling painting every year will make it possible to
avoid tedious and frequent careening. An epoxy coat is
recommended beforehand. You are reminded that any excessive
sanding before your antifouling paint attacks your gel coat and
impairs its reliability.
Your boat may regain her shine as new if polished. If a lasting and
isolated problem arises, contact your dealer.
C o n s t r u c t i o n
M a i n t e n a n c e
RECOMMENDATION
We strongly advise you against using a pressure washer.
You shall not use hot water or steam.
C a r r e e n i n g
H U L L & D E C K