manualshive.com logo in svg

Lagler UNICO, Руководство по эксплуатации, Страница: 8 / 68

Поделиться
Скачать
Lagler UNICO Скачать руководство пользователя страница 8

UNICO  01.07.2019

English / Englisch

2.1 HAZARD 

WARNINGS

  WARNING!

RISK OF DEATH from suffocation and RISK OF INJURY:

•  

Never

 wrap the power cable around your neck or other parts 

of the body!

RISK OF DEATH from electrical shock:

•  

The machine may 

never

 be used for wet processing 

operations of any kind!

•  

Do not expose the machine to rain! Do not use the machine 

in moist or wet environments!

• 

Never

 connect the machine to hazardous electrical power 

sources such as electrical installations that are too weak, 

not fuse protected or without electrical grounding! Only use 

safety sockets!

•  

To protect yourself and the machine against faults in the 

mains supply use a safety switch (for German mains supply 

 part number in 

Section 11, Spare parts UNICO

)!

 

Observe the applicable regulations and legal requirements 
in your country!

•  

All extensive maintenance work, especially on the electrical 

equipment,

 must

 be conducted by a qualified expert for safety 

reasons!

•  

The machine 

must

 be switched off and the power plug 

must 

be removed from the socket during all maintenance work 

and all work on the electrical equipment!

•  

Avoid body contact with grounded parts, e.g. pipes, radiators, 

ovens, refrigerators!

•  

The quality of the motor cable and the power cables 

must 

match the quality of the original LÄGLER

®

 cables!

•  

The motor cable and the power cables must be protected 

from mechanical and electrical damages in the workplace!

•  

Do not carry or pull by the machine by the cable! Do not pull 

on the cable to remove the plug from the socket! Protect the 

cables against heat, oil and sharp edges!

  WARNING!

RISK OF DEATH, RISK OF INJURY, RISK 

OF FIRE:

•   Be certain to read the hazard warnings 

and safety instructions before using 
the machine!

•   Instruct your co-workers and col-

leagues accordingly! Otherwise these 
persons could be exposed to danger 
or injured!

•   Keep these hazard warnings and 

safety instructions in a safe place!

•   Observe the applicable regulations 

a n d   l e g a l   r e q u i r e m e n t s   i n   y o u r 
country!

Hazard warnings and safety instructions

HAZARD WARNINGS AND SAFETY INSTRUCTIONS

2

8

Содержание UNICO





































































Отзывы:

Нет отзывов