11
Dolce Vita
|
RATTAN above ground pool
Assembly Instructions
&
Owner’s Manual
Section 3. Pool Parts Assembly
The following section of the manual will show how to construct the major sections of the pool. It is advisable to
set up an area on the ground or on a large table to make all the necessary pieces. Build one piece and use it as a
template guide for the others, ie., build one of the leg supports and use as a guide to build the other leg supports
etc.
3.1
Support Leg Assembly
Legend
STEP 1:
Use a screwdriver as a stopper to
connect the vertical leg post to the
horizontal post.
This temporarily prevents parts
from separating and aids in the
assembly during the next few steps.
STEP 2:
Using the hardware outlined, secure
the vertical and horizontal frame.
Bolt can be tightened at this stage.
Use 2 wrenches to tighten.
