LAFEME SESTO ST22, Инструкция по эксплуатации

Страница: 13 / 24

6. Connect outlet hose, power line and induction
line from the ceramic to each part of the seat.
Attach outlet water hose and power line to
toilet as the arrow shows in figure 1.
Note: Users need to open the waterproof
connector to check if correctly connect to
the power line. As figure 1
Induction line from the ceramic
Induction line from the seat
-10-
8. When finish the installation, remove the
packaging toward the arrow direction.
The remote control is installed in the
distance from the ground around
1600mm for convenience.
592
Product installation
7. Put the toilet seats set on the top of ceramic body
and then open the upper cover, fastened by fixing
screws and then put the decorative caps.
Screw rod
Decoration cap
Fixed hole
Outlet water hose
Power line
As figure 1
400
1600