Lafe no 1CEG015, Руководство пользователя

Страница: 12 / 44

Instructions for use
12
Electric
Kettle
EN
4 – Set the kettle on power base (short acoustic
signal is produced).
5 – To heat up water to 40, 50, 60, 70, 80, 90, 100°C
+–
70
°C
+–
70
°C
Set Start
6 – Once the set temperature has been reached
or water has been boiled, the kettle automati -
cally switches off and a short acoustic signal is
produced.
7 – Thanks to the base and a simple power terminal,
the water may be poured from the kettle without
the need to turn it off.
8 – Water may be poured from the kettle without lifting
the lid.
9 – Irrespective of the set operation mode, press
[fig. G] button to interrupt kettle operation (a short
acoustic signal is produced).
NOTE: Always lift the kettle by the handle, as its
housing tends to heat up.
II. “Keep Warm” function
1. Press and hold button
+–
by 3 seconds on the
display will light up icon
+–
and indicator of tem -
perature will flashing
2. Next by button +– set temperature which you
need keep in kette (example 40)
3. Next on the panel press buton
+–
4. Now this function is activated and the kettle will
start warm up the water
5. This function will be active by 2 hours, after that
will cancel automatically
6. This function you can cancel by
+–
button.
When no function is activated, the indicator shows the
current water temperature.
Water filter
Kettle is equipped with a water filter that can be re -
moved and washed if needed.
Protection against overheating and against turning
on without water.
Kettle is equipped with a modern controller, which pro -
tects it from overheating when used several times in
a row.
The kettle is also equipped with a safety feature that
turns it automatically off when there is no water inside.
In this case, when turned on, the kettle automatically
switches off after about 30 seconds and the backlight
turns off inside of the kettle. You should then remove
the kettle from the base and put the switch in “0” posi -
tion. After refilling with water, the kettle will be ready
for use.
IV. Cleaning and maintenance
Note! Clean the kettle only when it is cold!
1 – Before cleaning, remove the kettle from the power
base.
2 – Remove the water filter.
3 – The outer part of the housing can be cleaned with
a soft damp cloth.
4 – The interior of the kettle can be cleaned with spe -
cial kettle cleaning agents or a solution of water
and vinegar.
a – In order to do this, pour the cleaning agent or
solution into the kettle.
b – Turn the kettle on to bring the contents to a
boil.
c – Pour the boiled solution or cleaning agent out.
d – If necessary, repeat.
e – At the end of the cleaning, pour water into the
kettle, boil and then pour out.
f – The kettle is ready for use.
5 – If you are going to clean the base of the kettle
ALWAYS UNPLUG IT BEFORE CLEANING and
make sure it is thoroughly dry before connecting
again.
6 – After cleaning, insert the filter into the kettle, con -
nect the base to power supply and place the kettle
on the base. The kettle is ready for use.
V. Technical data
Model: CEG015
Rated voltage: AC 220-240V 50-60Hz
Max. power: 2200 W
Capacity: 1,7 l