Lafe CEG006, Руководство пользователя

Страница: 10 / 36

Instructions for use
10
Electric
Kettle
EN
10 – When removing the plug from the socket, do not pull the cord, but the plug.
11 – Remember that some parts of the device and housing get very hot during
operation. Be cautious and do not touch them – you can get burned. Only device
handle is made from thermally insulating materials. Therefore, hold the device by
the handle(s) as long as it is hot
12- Use the device on dry and stable surface only.
13- Never cover an operating or not cooled device
14- Remember that heat elements of the device require time to cool down com -
pletely.
15 – The device is class I IEC protection and it should always be plugged into a
socket with earth protection pin.
16 – The device should be switched off when being filled with water.
17 – Do NOT add any aggressive chemicals, alcohol, or vinegar to the water
container.
18 – Do NOT turn the device on without water in the container
19 – The water level in the device should always be between “Min.” and “Max.”
20 – there is a risk of scalding with the escaping water or steam. Do not touch any
part of the device except the handle when the device is in use and make sure that
the cover is closed properly. This device is suitable for heating water only. Never
pour any other liquid into the device
21 – Do not open the cover during heating
22 – In case of overfilling the device (exceeding the max. level), boiling water
may splash from the device.
23 – Ensure adequate space around and above the device when using it. The
device must not touch any flammable objects such as trimmings, paper towels,
curtains, clothes during operation.
24 – BE CAUTIOUS when using the device on surfaces sensitive to high tempe -
ratures. Insulating pads are recommended.
25 – ”Caution! Hot surface” – The temperature of surfaces may be higher
when the device is working, which means that housing elements may heat up si -
gnificantly during operation, USE GREAT CARE when working with the device!!!
26 – The device cannot be used with external timers or other remote control
systems
27 – The device may be used only with the stand delivered with the set
28 – DO NOT put any objects inside the machine
29 – During operation, it is NOT allowed to cover the air inlet and outlet grilles