DUO2-
user’s manual
user’s manual
- DUO2
49
50
• Mode: C, Drive to stored position; move the cursor to GO, then press OK key, the motor will go to position of we
saving in mode A Position.
• Mode: D, Drive to Satellite; move the cursor to GO, then press OK key, the motor will go to position of auto
calculate.
D1 Direction: Press
key to move direction to west or east.
• Mode: E, Set East Limit or Set west Limit, limit the motor move to east or to west.
E1 Direction: Press
key to move direction to west or east.
E2 Store: save the satellite position of A2
• Mode: F, Set Limit enable or disable, set the limit enable or disable,
8, Unicable: Press
key to select Unicalbe then press OK key into the Unicable setting.
Transponder: press
key to change the current TP.
IF Channel: press
key to change SCR channel.
Center Frequency: use value key to input number.
Store: store the setting.
• Satellite: Press
key into the satellite list. Use
key to move the cursor, then press OK key to select the
satellite of you want.
• Transponder: press
key into the TP list. Use
key to move the cursor, then press OK key to select the
satellite of you want.
• NIT: press
key to switch network searcher on/off
• Program: TV search type ALL/FTA
• Scan Mode: scan mode select, we can select Default TP / One TP/Blind.
• Scan Select: scan all satellites of selected or the current satellite.
3.4.2 Auto Scan
In the Sat/Tp Manager submenu, select Auto Scan into Automatic SAT Scan.
3.4.3 Transponder
In the Sat/Tp Manager submenu, select Auto Scan into Transponder.
Press
key to select the current satellite.
