DUO2-
user’s manual
user’s manual
- DUO2
39
40
3.1.3 Transponder
Press
key into the TP list. Use
key to move the cursor then press OK key to select the TP of you want.
3.1.11 Quick Search
In the satellite Find interface, pressing OK key will into the quick search.
If you set the local Longitude and Latitude Under the system setting, the angle of LNB, the orientation and elevation
of antenna, all will be display on the screen.
3.1.4 Frequency
Frequency of the current transport, Input the value by using the numeric keys.
3.1.5 Symb rate
Symbol rate of the current transport, Input the value by using the nu¬meric keys.
3.1.6 Polarity
Press
key to change Vertical or horizontal of polarization.
3.1.7 TONE
Press
key to on or off22kHz TONE Switch.
3.1.8 Bip Tone
Press
key to Switch beep tone. If we open the beep tone; when we into the search screen, the beep of lock
alarm will open.
3.1.9 DiSEqC Mode
Press
key to set the port type diseqc1.0/1.1 or Unicable
3.1.10 DisEqc type & Input
If we select diseqc1.0/1.1; we can press
key to set the port number. If select Unicable, we can press
to
select IF Channel; and use number key to input center Frequency.
