Hold-Down Brackets
Thank you for choosing
Allure Transitional Shades.
With proper installation and
care, your new shades will
provide many years of
beauty and performance.
Variations are the appeal of Allure...
The exclusive processes used in weaving these materials create
distinctive variations and you may see various threads or slubs
woven into the fabric creating light or dark colors intermittently
dispersed throughout. These variations are intentional and add to
the beauty and truly unique appearance of each shade.
Transitional Shades
Installation Instructions
Tools Needed
18-8004-HLDW NOV 2018
Step 1
INSTALL MAGNETIC HOLD-DOWN BRACKETS
Peel plastic film from magnetic strips and place
on both ends of the backside of bottom rail.
(Pic A)
Fully lower shade and set to closed postion.
Line up magnetic ball of hold-down bracket with
top magnetic strip on the bottom rail. (Pic B)
Mark with a pencil and secure to the wall or door.
Shade can now be in closed or open position and
will stay attached to magnetic hold-down bracket.
INSTALL HOLD-DOWN BRACKETS (optional)
The pins are installed in the end caps on the
bottom rail at the factory.
Lower the shade and line up the bottom of the
hold-down bracket with the bottom of the bottom
rail.
Mark for the screws through the back of the
hold-down bracket.
Screw hold-down to the wall or trim. Anchors (not
included) may be required if screwing into drywall.
Tilt the bottom rail and insert each pin into the
hold-down.
Hold downs are available for outside mount.
Magnetic strips
B.
1 3/4”
1 9/16”
13/16”
Slot for
pin
Slot for
screws
Magnetic Hold-Down Bracket
Optional Hold-Down Bracket
A.
