Lafayette Instrument Economy Clock/Counter
3700 Sagamore Pkwy N Lafayette, IN 47904 . Tel: (765) 423-1505
4
Inputs
Run:
If the Run input is the initial input received, the unit will start timing for the duration of
the input. Each activation of the input will add to the count and continue the clock. The Start
and Stop inputs will be ignored until a Reset command is received.
Start:
If a Start input is the initial input received, the unit will start timing until a Stop input is
received. During the timing or after it has stopped, the Run input will add an additional count.
Stop:
The Stop input is used to stop the timer if Start was used as the initial input.
NO (Normally Open):
The input is activated when it is connected to ground.
NC (Normally Closed):
The input is activated when it is disconnected from ground.
TONE:
If ON, whenever the Run input is activated, a tone will sound for the duration of the
activation.
Start Options
SNGL: If Start is set to Single Mode (SNGL), then the Start and Stop inputs may only be used
once before the Reset command is received.
REP: If Start is set to Repeat Mode (REP), then the Start and Stop inputs may be used multiple
times before the Reset command is received. Each subsequent Start will continue the timer
where it left off.
