To disassemble:
1.
Lift up on belly plate.
2.
Pull upper portion of genitalia back to remove pelvic
support pin.
Belly plate, genitalia with connectors and colon reservoir
may now be removed simultaneously.
Urinary Catheterization and Enema
Simulation –
After several uses, catheter
may “hang” when water has
washed away lubricant, causing
friction and binding. If this
occurs, generously lubricate a
catheter and insert into
urethra several times.
Laerdal
Recommends:
Catheters should be
well lubricated with
manikin lubricant or full
strength liquid soap
prior to using.
If catheter hangs during removal, work it with an “in and
out” motion. Use warm water in reservoirs when possible
to keep soap from clogging the catheters. Make sure
reservoirs are well drained of all water before disconnecting
valves.
Check List for Valves
Laerdal
Recommends:
A size 16 French
catheter is suggested for
urethral catheterization.
Size 7mm catheter is
suggested for enema
simulation.
That May Leak:
A. Do valve connections
have an O-ring?
B. Does the white C-clamp fit
firmly against base of valve?
C. Are valves attached
correctly?
D. If valves are attached
correctly, are they properly
connected to reservoirs
and to genitalia?
301-00001
Laerdal
10
