Lacunza Vulcano 7T E/E, Инструкция

Страница: 14 / 32

13
Flue socket
The gas flue socket can be fitted either at
the back or on top of the cooker.
The
simple gas flue socket is fitted on the
back
(without flapper valve,
dismantling the flapper valve and filling
the holes with the pair of nuts and bolts
supplied with the appliance) and the gas
flue socket with flapper valve,
which can
be opened or closed to regulate the flue
draught,
is fitted on the top of the
cooker. The unused flue socket must be
covered with the “Flue socket cover”
(see fig. 11).
The valve is marked to show the position
in which it is more open and more closed.
Left -flapper valve closed Right -flapper
valve open
Upper gas flue socket.
3.7. Characteristics of the oven.
The oven is provided with one steel rack
shelf and one baking tray shelf.
The hatch situated at the rear of the oven
can be opened to clean the soot
accumulation around the flue outlet and
maintenance purposes.
When cooking certain foods, the steam
which accumulates during the cooking
process of the food can be expelled from
the oven through the flue. To expel the
steam, open the bracket located at the rear
of the oven (figure 12) and also the storm
door of the oven (figure 13).
During the lighting of the fire, the oven
thermometer
will only give an
approximate temperature reading. Once
this period is over, the thermometer will
give and accurate temperature reading.
Figure 12
Figure 13
3.8. Lower drawers.
The storage drawers situated at the base of
the cooker may be used for storing items
and are not warming drawers.
3.9. Height adjustment (legs)
The range is 850mm high, but has 4
height adjustable legs, which will allow us
to gain height up to 900mm.
Height must be regulated before placing
the range in its final position. There is
access to the legs to adjust them with a
19mm spanner (figure 15).
Warning : caution when moving or
dragging the device on the ground, take
into account that the floor could be
scratched.