Lacunza SILVER 800, Инструкции к добавке

Страница: 5 / 16

Lacunza Silver 800/1000 Zero Clearance Box Assembly Instructions June 12, 2022
5
1.4 Now you can join the two Stand Sides with the four Stand Horizontal Long Brackets. You
can line them up with the Long Brackets go on the outside of each corner. Start by lining
up one side first, then move to the other side.
1.5 You will then need 16 x Self-Tapping Screws, to join everything and make the stand. Note
that the Bottom Tabs in the stand can also be used to fix the frame to the floor. Ensure
the base is secured to the floor, using fixings appropriate for the flooring structure. The
floor must be able to support the weight of the heater, flue, and fuel load, which is
approximately 300kg. Refer to Step 2.2, to see how the Tabs can be bent out.
1.6 This concludes the assembly for the Stand, and you can now prepare for the assembly of
the Zero Box. You will begin assembly with the stand, so if you haven’t secured your stand
down, we suggest you move it close to where the unit will be installed with the Zero Box,
if you haven’t so already, as the Zero Box can be quite heavy to move around.