Lacunza Nickel AUSTRALIA, Инструкция

Страница: 9 / 29

INSTRUCTIONS FOR THE INSTALLER 8
2.
2.3.2. Safety distances
Be sure to respect the appliance
installation distances from combustible
materials .
Figure No.6 - Safety distances for Nickel
800
Figure No.7 - Safety distances for Nickel
1000
Bear in mind that it may even be
necessary to protect non-combustible
material in order to prevent breakage,
deformation, etc., as a result of
overheating
if the non-combustible
material is not designed to withstand high
temperatures.
2.3.3. Checks before lighting for the first
time
•
Make sure that the glasses are not
broken or damaged.
•
Make sure that the flueway is not
obstructed with packing or loose parts.
•
Check the deflectors are correctly
positioned.
•
Make sure that the airtight joints
on the flue circuit are in perfect
condition.
•
Make sure that the doors close
properly.
•
Make sure that all moving parts are
fitted in place.
2.3.4. Height adjustment and levelling the
appliance
The appliance must be perfectly level,
horizontally and vertically, both at the
front and on the sides (use a spirit level).
The appliance has adjustable legs with
which to adjust its height.
The legs can be adjusted using a 24mm
spanner.
2.3.5. Casing
If the customer would like to coat the
appliance, the following instructions should
be followed.
Make sure that the material around the
appliance is not flammable or likely to
deteriorate as a result of heat (wallpaper,
carpet, plastic-based casing, Silestone,
etc.).
The image below gives an example of
how the appliance can be encased
properly: