CE ORIGINAL MANUAL
LACROS TROTTER T200/T400XL
VERSION CE 1.4 EN
9
▪
Bigstone-display
Turn on the display
Press the
”M”
button (1) on the left of the display to activate
the bicycle's electrical circuit. (Note that the battery is already
turned on) A menu will now appear on the display, the electrical
circuit is switched on
.
Switch bicycle LED lights on and off
Press the “
+
” button (2) for ± 2 seconds to turn on the
bicycle lights. A Light symbol appears in the display.
Press the "
+
" button (2) again for 2 seconds to switch off
the bicycle lights.
Thumb lever Walk Assist
By pushing the thumb lever (A) down when stationary, you
activate the walking mode which provides support from
0 km/h to 6 km/h. Note: The walking position using the thumb lever
does not work when the bicycle is in support position "0".
By using the thumb lever while cycling, the electric support
goes directly to its maximum (25 km/h).
Switch between the 9 levels of motor support
The electrical motor support has 9 levels. The active
setting is displayed at the bottom left of the display. You can
increase or decrease the support by using the
(+)
and
(-)
buttons.
Additional options of the display
Briefly pressing the
"M"
key successively scrolls through
various data at the bottom of the display:
(J) = Total Km/Miles reading (ODO)
(K) = Trip reading (TRIP)
(L) = Cycling time (TIME)
(M) = Maximum speed (MAX)
Reset Trip, Time and Maximum speed data by pressing the (-) button
for 2 seconds.
