20
CAUTIONS
!
NOTICE
INSTALLATION
1- Locate the unit at the proper counter height, in an area that is convenient for use. The location
should be level to prevent the unit or its contents from accidentally falling, and strong enough to
support the weight of the unit.
2- Do not place anything on top of the oven, doing so could damage slicer or subject personnel to
possible injury.
3- When setting up the unit for operation, make sure power to the unit is off. Failure to do so could
result in personal injury.
4- Unit is not weatherproof. For safe and proper operation locate the unit indoors where the
ambient air temperature is a minimum of 70ºF (21ºC) and a maximum of 85ºF (29ºC).
5- Do not locate the oven/grill in an area subject to excessive temperature or grease from grills,
fryers, etc. Excessive temperature could cause damage to the unit.
6- Do not place the oven in an area that restrict air flow around the front or rear of the unit.
7- Some exterior surfaces on the unit will get hot. Use caution when touching these areas to avoid
injury.
UNPACKING
1- Open the large box. Remove all packing materials and protective covering from the unit and
parts. Do not discard the wrapping until you have checked that the blender is working correctly.
2- Remove the accessories and clean them with soapy water, to eliminate waste produced during
manufacturing.
3- We recommend maintaining the oven at maximum temperature for 15 minutes to eliminate oils
and greases derived from manufacturing. Any emission of smoke during the first 20 minutes of
use is considered normal.
1- The power supplied to this unit must comply with electrical requirements on it's label. Damage
or fire may result if the incorrect power is used.
2- Turn off all switches and unplug the unit should an emergency situation occur.
3- In the case of a unit being used which has been abused, damaged either accidentally or inten-
tionally, modified, improperly installed or used in any manner contrary to those included in the
product instructions, guantee will automatically be canceled.
4- The machine can not be washed or placed into water as it is not a waterproof device. Putting
the unit into water may result in electric shock and will damage the mechanical and electrical
components.
5- When the oven is not being used, turn all the switches off and switch it off.