Managed Media Converter Chassis System
18 User Manual
3.4. CPE MC AutoReport
Chassis => Chassis # 0~3 => MC # 1~8 => CPE MC AutoReport
Status of Loopback test : ‘ Not Test ‘ or ‘ Test ‘.
Option B : ‘ Support ‘ or ‘ Not Support ‘.
< Note > : If the Option B is support by Terminal side, which can inform speed, duplex,
and auto-negotiation in terminal, our default setting is ‘ Support ‘.
TP port auto-negotiation : ‘ Enable ‘ or ‘ Disable ‘.
TP port speed selection : ‘ 100M ‘ or ‘ 10M ‘.
TP port duplex mode selection : ‘ Full ‘ or ‘ Half ‘.
TP port flow control selection : ‘ Enable ‘ or ‘ Disable ‘.
TP port link : ‘ Link Up ‘ or ‘ Link Down ‘.
Fiber port flow control/backpressure : ‘ Enable ‘ or ‘ Disable ‘.
Fiber port duplex mode : ‘ Full ‘ or ‘ Half ‘.
Fiber port signal detect : ‘ On ‘ or ‘ Off ‘.
MC power status : ‘ Normal ‘ or ‘ Fault ‘.
MC status : ‘ Normal ‘ or ‘ Fault ‘.
