INSTALL PRODUCT SOFTWARE
Save the file you downloaded from the LaCie website onto a USB key or hard drive. Make sure it is saved to
1.
the root level of the drive, ie not inside a folder (Mac users, see screenshot for example).
Make sure the LaPlug is turned off, then connect the USB key or hard drive to the LaPlug.
2.
Press and hold the power button for 10 seconds. When the LED turns red, release the power button.
3.
Before two seconds elapse, push and immediately release the power button once again.
4.
After about two minutes, the LaPlug will reboot automatically.
5.
Verify that the new software was installed by revisiting the
Dashboard > Support
page or the LaCie
6.
Network Assistant
Configuration Window
.
LaPlug User Manual
LaCie
43
