2.3 Attaching the Drive Stand
You can use your LaCie drive in its upright position after installing the stand.
1) From the rear of the drive, slide the stand rail into the side
groove of your LaCie drive as shown:
2) Slide the stand forward until its rail touches the rear of the drive.
3) Tighten the two socket screws from the underside of the stand,
using the hex key provided, until the stand is firmly in place.
4) When the stand is mounted, your drive should look like this:
2.4 USB Cables and Connectors
Your LaCie drive is shipped with a USB 2.0-certified USB cable,
to ensure maximum data transfer performance when connected
to a USB 2.0 port. The cable will also work when connected to a
USB 1.1 port, but drive performance will be limited to USB 1.1
transfer rates.
Getting to Know Your LaCie Hard Drive
page 8
LaCie d2 USB Hard Drive
USB Connector Type A
(Computer Side)
USB Connector Type B
(Peripheral Side)
