LaCie hard disk MAX
• DESIGN BY NEIL POULTON
Getting Connected
User Manual
page 10
2.1. Turning the Drive On
IMPORTANT INFO:
Please connect the power supply before
connecting the USB cable to ensure that the volume mounts
correctly on your computer.
1. Plug the power supply into an electrical outlet and connect
the power cable to the hard disk MAX (Fig. 2.1-A).
2. Turn on the drive by moving the power switch on the back of
the drive to the ON position (Fig. 2.1-B).
3. Move on to the next step, section
2.2. Connecting the USB
Cable
.
CAUTION:
Only use the AC adapter supplied with your
specific LaCie hard disk MAX. Do not use a power sup-
ply from another LaCie drive or another manufactur-
er. Using any other power cable or power supply may
cause damage to the device and void your warranty.
Always remove the AC adapter before transporting your LaCie
hard disk MAX. Failure to remove the adapter may result in
damage to your drive and will void your warranty.
TECHNICAL NOTE:
You may use your LaCie hard disk MAX
when in a foreign country thanks to its 100-240 Volt power
supply. To be able to use this feature, you may need to pur-
chase an appropriate adapter or cord. LaCie accepts no re-
sponsibility for any damage to the drive resulting from the use
of an inappropriate adapter. Using an adapter other than one
authorized by LaCie will void your warranty.
Fig. 2.1-A
Fig. 2.1-B
